Service manual

V-62

4. After 2:Maintenace screen (Init NVM) is displayed, press button three times.

5. After 2:Maintenace screen (Media CurrentAdi) is displayed, press [Form Feed/Set]

button.

6. After BTR CurrentAdi screen (Plain paper) is displayed, press

button and select

the used paper mode (includes front and back sides).

Note:

Refer to 6.2 User mode Menu tree.

Example in case of selecting board 1 back side:

7. Press [Form Feed/Set] button.

8. After the current value is displayed, change the value (increase and reduce the

transfer current value) by

and

buttons.

Example in the case of pressing

button once and increasing the value 1 step:

9. Press [Form Feed/Set] button to save the value.

Note:

Usually, it is increase 1 or 2 steps.

"*" indicates that the changed value is now valid.

10. Press [Menu] button and back to Ready to Print (Printer screen (printable)) screen.

2:Maintenance

Init NVM

2:Maintenance

BTR CurrentAdj

Plain Paper

BTR CurrentAdj

ThinkPaper 1 BK

0 *

ThinkPaper 1 BK

Ready to Print