Service manual

V-56
4.11.2 Parameter list print
Function: Outputting a list of setting and displaying parameters held by IOT in NVM
Operation procedure:
1. Enter the Diag. (C/E) mode.
2. Select [CE Maintenance Parameter] with the
and buttons.
3. Press the Form Feed/Set button to advance to setting/display parameter selection in
[CE Maintenance Parameter].
4. Select [Parameter Print] with the
and buttons.
5. Press the Form Feed/Set button to determine the selection.
6. Press the Form Feed/Set button again to print the parameters.
HL-4200CN MCU Parameter List Serial No. 000000
Registration Adjust Slow Scan Paper from Black : 0
Registration Adjust Slow Scan, 600dpi, Magenta from Black : 6
Yellow from Black : 4
Cyan from Black : 1
Registration Adjust Slow Scan, 1200dpi, Magenta from Black : 11
Yellow from Black : 9
Cyan from Black : 1
Registration Adjust Fast Scan Magenta from Black : 1
Yellow from Black : 3
Cyan from Black : 3
Registration Adjust Fast Scan, Paper from Black : MP Tray : 0
Paper from Black : Tray1 : 0
Paper from Black : Tray2 : 0
Paper from Black : Tray3 : 0
Paper from Black : Duplex : 0
Life Counters Yellow Toner Dispense Time : 645
Magenta Toner Dispense Time : 700
Cyan Toner Dispense Time : 802
Black Toner Dispense Time : 648
Transfer Roll Cartridge1 Sheets : 373
Printer Sheets : 373
Printer Head Sheets : 369
Printer Head Time : 8183
Printer Head Yellow Dispense : 645
Printer Head Magenta Dispense : 782
Printer Head Cyan Dispense : 883
Printer Head Black Dispense : 730