Service manual

V-53
4.9 Installation Setting
Function: Setting parameters at printer installation and displaying various counter values
Operation procedure:
1. Enter the Diag. (C/E) mode.
2. Select [CE Maintenance Installation Set] with the
and buttons.
3. Press the Form Feed/Set button to advance to setting/display item selection in [CE
Maintenance Installation Set].
4. Select a setting/display item with the
and buttons. (For the setting/display
items, refer to the table below.)
5. Press the Form Feed/Set button to display the setting/display item.
Setting/display items
Item Range Description
Serial No. 10 digits Sets a serial number.
Count Display ON, OFF Sets whether to display the billing counter.
Configuration -- Sets a dip switch.
Col print Count -- Displays the current value of the color print counter.
B/W Print Count -- Displays the current value of the monochrome print
counter.
Tot Print Count -- Displays the current value of the total print counter.
Backup Col Count -- Displays the current value of the backup color
counter.
Backup B/W Count -- Displays the current value of the backup monochrome
counter.
Backup Tot Count -- Displays the current value of the backup total counter.
Col Error Count -- Displays the current value of the color print error
counter.
B/W Error Count -- Displays the current value of the monochrome print
error counter.
PrnCounter Reset -- Initializes three counter values (clears to zero).
Count copy M to B -- Copies from a normal meter to a backup file.
Count copy B to M -- Copies from a backup file to a normal meter.
NVM Init -- All clear of NVM
Job Log Init -- Clear of Job Log
FailHistoryInit -- Clear of fail history
JamHistoryInit -- Clear of jam history
DloadHistoryInit -- Clear of download history