Service manual

V-50
Menu
No.
Part/signal name Test method
Reference
BSD
DO-36
TRAY1 TURN CLUTCH
ON
Check by hearing that the clutch
operates.
2.7.1
DO-38
TRAY1 FEED SOLENOID
ON
Check by hearing that the clutch
operates.
2.7.1
DO-40
CHARGI FILM ON <WARNING><CAUTION>
2.8.1
DO-42
DEVE BIAS AC ON <WARNING><CAUTION>
2.8.2
DO-44
DEVE BIAS DC Y ON <WARNING><CAUTION>
2.8.2
DO-46
DEVE BIAS DC M ON <WARNING><CAUTION>
2.8.2
DO-48
DEVE BIAS DC C ON <WARNING><CAUTION>
2.8.2
DO-4a
DEVE BIAS DC K ON <WARNING><CAUTION>
2.8.2
DO-4c
IDT1 PLUS ON <WARNING><CAUTION>
2.8.6
DO-4e
IDT1 MINUS ON <WARNING><CAUTION>
2.8.6
DO-50
IDT2 PLUS ON <WARNING><CAUTION>
2.8.6
DO-52
IDT2 MINUS ON <WARNING><CAUTION>
2.8.6
DO-54
IDT1 CLEANER ON <WARNING><CAUTION>
2.8.6
DO-56
IDT2 CLEANER ON <WARNING><CAUTION>
2.8.6
DO-58
TRANSFER ROLL
CARTRIDGE PLUS ON
<WARNING><CAUTION>
2.8.6
DO-5a
TRANSFER ROLL
CARTRIDGE MINUS ON
<WARNING><CAUTION>
2.8.6
DO-5c
DTS ON <WARNING><CAUTION>
2.8.6
DO-60
TRAY2 TURN CLUTCH
ON
Check by hearing that the clutch
operates.
2.7.3A
2.7.3B
DO-62
TRAY2 FEED SOLENOID
ON
Check by hearing that the solenoid
operates.
2.7.3A
2.7.3B
DO-64
TRAY3 TURN CLUTCH
ON
Check by hearing that the clutch
operates.
2.7.4
DO-66
TRAY3 FEED SOLENOID
ON
Check by hearing that the solenoid
operates.
2.7.4
WARNING
Never touch a high-voltage or live section during high-voltage output.
Never touch a drive section during driving.
Output a laser beam with all the covers attached.
CAUTION
To avoid damage, do not keep the laser ON for a long time.
(Turn it to OFF within several seconds.)