Service manual

V-6
LCD Display < Name of Fail>
Contents of Trouble
Action Reference
BSD
016-333
Turn OFF the Power.
<NIC Flash ROM Application Module Checksum Error> Power off/on
2.3.1
2.3.3
016-334
Turn OFF the Power.
<NIC MAC Address Checksum Error> Power off/on
2.3.1
2.3.3
016-335
Turn OFF the Power.
<NIC Ethernet BIST parity/RAM R/W Error>
Power off/on
2.3.1
2.3.3
016-336
Turn OFF the Power.
<NIC Internal Loopback Error>
Power off/on
2.3.1
2.3.3
016-350
Turn OFF the Power.
<IEEE1284 Data Error>
Detected by IEEE1284 controller.
Power off/on
2.3.1
2.3.3
016-360
Turn OFF the Power.
<PCI Option#0 Fail>
PCI option 0 detection error
Power off/on
2.3.1
2.3.3
016-361
Turn OFF the Power.
<PCI Option#1 Fail>
PCI option 1 detection error
Power off/on
2.3.1
2.3.3
016-370
Turn OFF the Power.
<IOT-ESS Communication Fail >
Communication fail between IOT and ESS
Power off/on
2.3.1
2.3.3
Initialising
Press set
<NVM Fail >
Checking that values wrote at NVM Initializing have been retained in the
specified area on NVM.
Perform usual startup by
Key On to initialize NVM.
2.3.1
2.3.3
Duplex Jam
Open B-Cover
<IOT Duplex JAM>
Duplex jam sensor cannot detect passage of paper within specified time.
Remove the jammed paper.
See duplex JAM FIP
2.9.4
2.9.6
Fuser Jam
Open A/B-Cover
<IOT Fuser JAM>
Exit sensor cannot detect passage of paper within specified time.
Remove the jammed paper.
See fuser JAM FIP
2.9.1
2.9.6
Regi. Jam
Open A-Cover
<IOT Regi JAM>
Regi sensor cannot detect passage of paper within specified time.
Remove the jammed paper.
See Regi JAM FIP
2.7.6
2.7.7
Feed Jam
Check Tray
<IOT Feed JAM>
Regi sensor cannot detect passage of paper within specified time.
Remove the jammed paper.
See feed JAM FIP
2.7.6
2.7.7