Service manual

V-5
LCD Display < Name of Fail>
Contents of Trouble
Action Reference
BSD
016-313
Turn OFF the Power.
<ASIC Fail >
The controller’s ASIC chip detected this error.
Power off/on
2.3.1
2.3.3
016-314
Turn OFF the Power.
<Video Sync Fail>
Detected by an incorrect synchronous signal input.
Power off/on
2.3.1
2.3.3
016-315
Turn OFF the Power.
<ESS On-Board RAM W/R Check Fail >
Detected by RAM W/R check at initialize
Power off/on
2.3.1
2.3.3
016-316
Turn OFF the Power.
<ESS RAM DIMM W/R Check Fail >
Detected by standard RAM W/R check at initialize.
Power off/on
2.3.1
2.3.3
016-317
Turn OFF the Power.
<ESS ROM Check (Main) Fail>
Main program ROM checksum error
Power off/on
2.3.1
2.3.3
016-323
Turn OFF the Power.
<ESS NVRAM1 W/R Check Fail >
Detected by Master NVRAM W/R check.
Power off/on
2.3.1
2.3.3
016-324
Turn OFF the Power.
<ESS NVRAM2 W/R Check Fail >
Detected by backup NVRAM W/R check.
Power off/on
2.3.1
2.3.3
016-325
Turn OFF the Power.
<ESS NVRAM3 W/R Check Fail >
Detected by NVRAM W/R check for print log.
Power off/on
2.3.1
2.3.3
016-326
Turn OFF the Power.
<ESS NVRAM4 W/R Check Fail >
Detected by NVRAM W/R check for print log
Power off/on
2.3.1
2.3.3
016-327
Turn OFF the Power.
<ESS NVRAM1 ID Check Fail >
This error occurs if the backup device is inserted in master socket.
Replace with the correct
device.
2.3.1
2.3.3
016-328
Turn OFF the Power.
<ESS NVRAM2 ID Check Fail >
This error occurs if the master device is inserted in backup socket.
Replace with the correct
device.
2.3.1
2.3.3
016-330
Turn OFF the Power.
<NIC-ESS Communication Fail>
Communication fail between NIC and ESS
Power off/on
2.3.1
2.3.3
016-331
Turn OFF the Power.
<NIC Flash ROM Boot Module Checksum Error> Power off/on
2.3.1
2.3.3
016-332
Turn OFF the Power.
<NIC RAM R/W Test Error> Power off/on
2.3.1
2.3.3