Service manual

- IV-84 -
2.6.24 Holder retard
1) Remove the clutch ASSY friction on the shaft retard from the cassette.
2) Release the hook of the spring retard hitched to the bottom groove of the holder
retard from the cassette.
3) Release the hook securing the top portion of the holder retard from the cassette
and move the holder retard leftward.
Fig.4-147
4) Pull out the right end of the holder retard slightly from the cassette and extract the
holder retard and remove.
Fig.4-148
Holder retard
Clutch ASSY friction
Holder retard
Spring retard