Service manual

- IV-63 -

2.5.10 Box ASSY MCU/ESS

1) Remove the connector from the right side of the printer.

2) Remove the connector on the scanner ASSY from the right side of the printer.

3) Remove the connector from the left side of the printer.

Fig.4-113

4) Remove 4 screws securing the box ASSY MCU/ESS to the printer.

5) Pull out the box ASSY MCU/ESS rearward from the printer and remove.

Fig.4-114

Box ASSY MCU/ESS

Screw, M3x6