Service manual

- IV-59 -

2.5.6 Drive ASSY DEVE

1) Remove 4 screws securing the Drive ASSY DEVE from the right side of the printer.

2) Remove the Drive ASSY DEVE from the printer.

Fig.4-105

2.5.7 Actuator I/R

1) From the right side of the printer, release the hook of the spring I/R from the convex

portion of the plate ASSY lever R.

2) Release the hook securing the actuator I/R to the shaft on the plate ASSY lever R.

3) Remove the actuator I/R from the plate ASSY lever R together with the spring I/R.

4) Remove the spring I/R from the actuator I/R.

Fig.4-106

Drive ASSY DEVE

ctuato

I/R

Screw, DT M4x10