Service manual

- IV-55 -

2.5.2 HSG ASSY BIAS

1) Remove 5 screws securing the HSG ASSY BIAS to the left side surface of the

printer.

2) Remove the HSG ASSY BIAS from the printer.

3) Remove 8 contact pads from the printer.

Fig.4-99

2.5.3 Lever drum: L

1) Remove 4 screws securing the plate ASSY lever L from the left side of the printer.

2) Remove the plate ASSY lever L from the printer.

3) Release the hook of the spring lever 30N hitched over the convex portion of the 4

lever drum: L from the right side of the printer.

Fig.4-100

HSG ASSY BIAS

Spring lever 30N

Plate ASSY lever L

Screw, M3x10