Service manual

- IV-45 -

2.4 Top of the Printer

2.4.1 Holder toner cartridge ASSY unit

Note:

When removing the holder toner cartridge ASSY unit, remove the toner deposit on the

holder toner cartridge ASSY with a vacuum cleaner before starting the removal process.

Note:

When removing the toner deposit on the holder toner cartridge ASSY with a vacuum

cleaner, attach an earth cord to the end of the cleaner to avoid the static electricity.

Note:

When removing the toner deposit on the holder toner cartridge ASSY, be careful not to

allow the toner to fly to the sensors on the holder toner cartridge ASSY by the static

electricity.

Note:

Do not touch the sensor face.

1) Remove the connector (A) of fan rear on the LVPS STD from the right side of the

printer and release the cable assembly.

2) Remove the 2 connectors (B, C) on the PWBA DRV HBN from the right side of the

printer.

Fig.4-81

Holder toner cartridge ASSY unit

LVPS

PWBA DRV HBN

Fan harness

“A”

“B”

“C”