Service manual

- IV-32 -
2.3.18 Motor ASSY DUP
1) Release the hook securing the gear roll to the shaft of the roll exit.
2) Remove the gear roll from the shaft of the roll exit.
3) Remove the gear 40/42 from the left side of the chute ASSY exit.
4) Remove the gear 48 from the left side of the chute ASSY exit.
5) Remove 3 screws securing the motor ASSY DUP to the chute ASSY exit.
6) Remove the motor ASSY DUP from the chute ASSY exit.
Fig.4-57
Motor ASSY DUP
Gear roll: exit
Gear 40/42
Gear 48
Chute ASSY exit
Screw, M3x6
Sleeve
Grommet
exit