Service manual

- IV-29 -

2.3.15 Chute ASSY exit

1) Disconnect the connector of the motor ASSY DUP on the chute ASSY out and

release the cable from the clips.

2) Remove 2 screws securing the chute ASSY exit to the chute ASSY out.

3) Pull out the chute ASSY exit from the left side surface of the chute ASSY out.

Note:

When replacing the chute ASSY exit, be careful to avoid the actuator full on the chute

ASSY out.

Fig.4-54

Left

Chute ASSY exit

ctuator full

Screw, M3x10