Service manual

- IV-27 -
2.3.13 Shaft ASSY roll feed
1) Release the hook of the spring sol from a convex portion on the stopper sol cam
from the chute ASSY out.
2) Release the hook securing the stopper sol cam to the left of shaft MSI, and remove
the stopper sol cam from the shaft from the chute ASSY out.
3) Release the hook securing the gear MSI to the right of shaft MSI, and remove the
gear MSI from the chute ASSY out.
4) Release the hooks of spring N/F from the left and right ends of shaft ASSY roll feed.
5) Release the hook securing the cam MSI to the shaft MSI, and move the cam MSI to
the center.
Fig.4-51
Spring N/F
Stopper
sol cam
Left
Front
Right
Spring N/F
Chute ASSY out
Gear MSI
Cam MSI
Shaft ASSY roll feed
Cam MSI