Service manual

- IV-24 -
2.3.7 Sensor photo: MSI
1) Remove the connector on the sensor photo: MSI from the chute ASSY out.
2) Release the 3 hooks securing the sensor photo: MSI to the chute ASSY out.
3) Remove the sensor photo: MSI from the chute ASSY out.
Fig.4-45
2.3.8 Bracket ASSY eliminator
1) Remove 1 screw securing the bracket ASSY eliminator to the chute ASSY out.
2) Raising the left end of the bracket ASSY eliminator upward, pull out the bracket
ASSY eliminator toward the left to remove from the chute ASSY out.
Fig.4-46
Sensor photo: MSI
Rear view
Bracket ASSY eliminator
Chute ASSY out
Screw, M3x10