Service manual

- IV-1 -
CHAPTER IV ASSEMBLY / DISASSEMBLY
1. REPLACING PROCEDURE OF PERIODICAL REPLACEMENT PARTS
Periodical replacement parts are the parts to be replaced periodically to maintain product
quality. Refer to APPENDIX5. “PERIODICAL REPLACEMENT PARTS” in detail.
1.1 Replacing the Fuser ASSY
WARNING
Fuser is high temperature after operation. Be careful when working it not to get
burning.
1) Push up latch B and fully open the chute ASSY out.
Fig.4-1
2) Push the lever on left side of the cover ASSY and open the cover ASSY.
Fig.4-2
3) Push and slide forward the switches on both sides of the fuser ASSY.
Fig.4-3