Setting Up Your Printer Step 1 Setting Up Your Printer Step 2 Parallel Network (for HL-2040/ 2070N) (for HL-2070N) page 12 page 14 Peer-toPeer (LPR) page 15 Peer-toPeer (NetBIOS) page 15 Network (for HL-2070N) Mac OS® X 10.2.4 or greater page 18 Mac OS® 9.1 – 9.2 page 20 Mac OS® X 10.2.4 or greater page 21 Mac OS® 9.1 – 9.
Safety Precautions To Use the Printer Safely Warning Warnings tell you what to do to prevent possible personal injury. Electrical Hazard Electrical Hazard icons alert you to a possible electrical shock. Hot Surface Hot Surface icons warn you not to touch machine parts that are hot. Caution Cautions specify procedures you must follow or avoid to prevent possible damage to the printer or other objects.
Table of Contents To Use the Printer Safely ..........................................................................................................2 Regulations ................................................................................................................................2 ■ Getting Started Carton Components ..................................................................................................................4 Control Panel ...................................................
Regulations Federal Communications Commission (FCC) Declaration of Conformity (For USA) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Telephone: (908) 704-1700 declares, that the products Product name: Model number: Model number: Product options: Laser Printer Laser Printer HL-2030, HL-2040 and HL-2070N HL-20 ALL complies with Part 15 of the FCC Rules.
FDA Regulations (100 to 120 volt Model Only) U.S. Food and Drug Administration (FDA) has implemented regulations for laser products manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the United States. One of the following labels on the back of the printer indicates compliance with the FDA regulations and must be attached to laser products marketed in the United States. MANUFACTURED: Brother Industries, Ltd.
■ Getting Started Carton Components Printer 1 2 7 1 Face-down Output Tray Support Flap (Support Flap) 2 Control Panel 3 Front Cover 4 Manual Feed Slot 5 Paper Tray 6 Power Switch 7 Face-down Output Tray (Top Output Tray) 3 4 5 6 CD-ROM (including User's Guide) Quick Setup Guide Drum Unit Assembly AC Power Cord (including toner cartridge) Carton components may differ from one country to another. Save all packing materials and the printer carton in case for any reason you must ship your printer.
Control Panel 1 Toner - LED indicates when the Toner is low or empty. 2 Drum - LED indicates when the Drum is nearing end of life. 3 Paper - LED indicates when there is Cover open or a paper jam. 4 Ready - LED indicates when the printer is ready or if Data is remaining. 5 Go Button - Wake-up / Error recovery / Form feed / Cancel printing Reprint User's Guide Chapter 3.
Supplied CD-ROM You can find a variety of information on the CD-ROM. Mac OS® X 10.2.4 or greater Users Mac OS® 9.1 to 9.2 Users 4 1 2 3 4 5 6 1 2 4 5 6 This screen is not supported by Mac OS® 9.1 to 9.2. 1 Initial Setup Instructional movie for printer setup. 2 Install Printer Driver Install the printer driver. 3 Install Other Drivers or Utilities Install optional drivers, utilities and Network management tools. 4 Documentation View the Printer User's Guide and Network User's Guide in PDF format.
Step 1 Setting Up Your Printer Setting Up Your Printer 1 Insert the CD-ROM into the CD-ROM Drive For Macintosh® Users For Windows® Users Do NOT connect the interface cable. You will be prompted to connect the interface cable during the driver installation. Click the Initial Setup icon on the menu screen. Mac OS® X 10.2.4 or greater Users 2 Click the Initial Setup icon on the menu screen. 3 You can view the initial setup instructions and follow the steps on pages 8 to 10.
Step 1 Setting Up Your Printer 2 Install the Drum Unit Assembly Do NOT connect the interface cable. You will be prompted to connect the interface cable during the driver installation. 1 Put the drum unit assembly into the printer. 5 Close the front cover of the printer. Open the front cover of the printer. Front cover 8 4 2 Unpack the drum unit assembly. 3 Rock it from side to side several times to distribute the toner evenly inside the assembly.
Fan the stack of paper well to avoid paper jams and misfeeds. 4 Put paper in the paper tray. Check that the paper is flat in the tray and below the maximum paper mark. Windows® USB 3 5 Put the paper tray firmly back in the printer. Macintosh® Network For Legal size paper, press in the inside latches and pull out the back of the paper tray. (Legal size paper is not available in some regions.) Up to here.
Step 1 Setting Up Your Printer 4 Print a Test Page Do NOT connect the interface cable. You will be prompted to connect the interface cable during the driver installation. 1 4 Press the Go button. The printer prints a test page. Check that the test page has printed correctly. Make sure that the printer power switch is off. Connect the AC power cord to the printer. This function won’t be available after the first print job you send from your PC. 2 Plug the AC power cord into an AC outlet.
Step 2 Installing the Printer Driver Setting Up Your Printer Follow the instructions on this page for your operating system and interface cable. The screens for Windows® in this Quick Setup Guide are based on Windows® XP. The screens for Mac OS® X in this Quick Setup Guide are based on Mac OS® X 10.3. Windows® USB For USB Interface Cable Users ..................................... Go to page 12 Windows® Parallel For Parallel Interface Cable Users .............................
Step 2 Installing the Driver For USB Interface Cable Users (Windows® 98/Me/2000/XP Users) Installing the driver and connecting the printer to your PC If the Found New Hardware Wizard appears on your PC, click the Cancel button. A C 1 2 12 3 Select the USB cable. 4 Read the license agreement carefully. Then follow the on-screen instructions. 5 When this screen appears, make sure the printer power switch is on. Connect the USB interface cable to your PC, and then connect it to the printer.
Setting Up Your Printer Setting your printer as the default printer (For Windows® 2000/XP users only) 1 Click Start and then Printers and Faxes. 2 Select the icon of the appropriate printer. 3 From the File menu, select Set as Default printer. Windows® USB Click the Finish button. If you want to register your product on-line, check the On-Line Registration box. For Windows® 98/Me users: The Setup is now complete. The setup is now complete.
Step 2 Installing the Driver For Parallel Interface Cable Users (HL-2040/2070N Users) Connecting the printer to your PC and installing the driver 1 Click Install Printer Driver on the Menu screen. 2 Select the Parallel interface. 3 Turn off the printer power switch. 5 Read the license agreement carefully. Then follow the on-screen instructions. 6 Click the Finish button. If you want to register your product on-line, check the On-Line Registration box. 7 4 Turn on the printer power switch.
Setting Up Your Printer For Network Interface Cable Users (HL-2070N Users) For Brother Peer-to-Peer Network Printer Users (LPR / NetBIOS) ■ If you are going to connect the printer to your network, we recommend that you contact your system administrator prior to installation or see the Network User’s Guide. ■ Before installation, if you are using Personal Firewall software (e.g. the Internet Connection Firewall available in Windows XP), disable it.
Step 2 Installing the Driver For Network Interface Cable Users (HL-2070N Users) 8 For LPR Users: Select Search the network for devices and choose from a list of discovered devices (Recommended). Or enter your printer's IP address or its node name. Click the Next button. 0 Click the Finish button. For NetBIOS Users: Select Search the network for devices and choose from a list of discovered devices (Recommended). Click the Next button.
Setting Up Your Printer For Network Shared Printer Users If you are going to connect to a shared printer on your network, we recommend that you ask your system administrator about the queue or share information of the printer prior to installation. 2 Select the Network interface. 3 Read the license agreement carefully. Then follow the on-screen instructions. 4 Select Network Shared Printer, and then click the Next button. 5 Select your printer's queue, and then click the OK button.
Step 2 Installing the Driver For USB Interface Cable Users For Mac OS® X 10.2.4 or greater Users Connecting the printer to your Macintosh & installing the driver 1 Click Install Printer Driver on the Menu screen. 3 Connect the USB interface cable to your Macintosh, and then connect it to the printer. Do not connect the USB cable to the keyboard USB Port or a non-powered USB Hub. 2 For HL-2030/2040 users: Select the USB interface. Select the USB interface.
Open the Printer Setup Utility icon. 8 Click Add. A Setting Up Your Printer 7 From the Printer Setup Utility menu, select Quit Printer Setup Utility. Select USB. 0 Select the appropriate printer, and then click the Add button. For Administrators Macintosh® USB 9 Installing the Printer Driver The setup is now complete.
Step 2 Installing the Driver For USB Interface Cable Users For Mac OS® 9.1 to 9.2 Users Connecting the printer to your Macintosh & installing the driver 1 Insert the CD-ROM into your CD-ROM drive. Open the Mac OS 9 folder. 4 Connect the USB interface cable to your Macintosh, and then connect it to the printer. Do not connect the USB cable to the keyboard USB Port or a non-powered USB Hub. 2 3 Open your language folder. 5 Make sure the printer power switch is on.
Setting Up Your Printer For Network Interface Cable Users (HL-2070N Users) For Mac OS® X 10.2.4 or greater Users Connecting the printer to your Macintosh & installing the driver 5 Turn on the printer power switch. 6 From the Go menu, select Applications. 7 Open the Utilities folder. Select the Network interface and follow the on screen instructions. Restart your Macintosh®. 4 Connect the network interface cable to the printer, and then connect it to a free port on your hub.
Step 2 Installing the Driver For Network Interface Cable Users 8 Double-click the Printer Setup Utility icon. 9 Click Add. A Select Brother HL-2070N series, and then click the Add button. If there is more than one of the same model printer (HL-2070N) connected on your network, the Ethernet address (MAC address) will be displayed after the model name. Network User's Guide Chapter 6. 0 Make the following selection. B From the Printer Setup Utility menu, select Quit Printer Setup Utility.
Setting Up Your Printer For Mac OS® 9.1 to 9.2 Users 1 Turn off the printer power switch. 2 Connect the network interface cable to the printer, and then connect it to a free port on your hub. 4 Double-click the Printer Driver Installer icon to install the printer driver. Follow the on-screen instructions. 7 From the Apple menu, Open the Chooser. 8 Click the Brother Laser (IP) icon, and then select BRN_xxxxxx*. Click the Setup... button. Turn on the printer power switch.
■ For Administrators (HL-2070N Users) Installing the BRAdmin Professional Configuration Utility (Windows® Users Only) The BRAdmin Professional utility is designed to manage your Brother network connected devices. For more information on BRAdmin Professional go to http://solutions.brother.com 1 Insert the CD-ROM into your CD-ROM drive. The opening screen will appear automatically. Follow the on-screen instructions. 2 Click the Install Other Drivers or Utilities icon on the menu screen.
Setting Up Your Printer Web browser The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol). The User Name is 'admin' and the default Password is 'access'. You can use the web browser to change this password. Windows® USB Network User's Guide Chapter 2. Turn off the printer. 4 Press the Go button six times.
■ Other Information Shipment of the Printer If for any reason you must ship your Printer, carefully package the Printer to avoid any damage during transit. We recommend that you save and use the original packaging. The Printer should also be adequately insured with the carrier. When shipping the printer, the DRUM UNIT assembly and TONER CARTRIDGE must be removed from the printer and placed in a plastic bag.
T Setting Up Your Printer Option The printer has the following optional accessories. You can expand the capability of the printer by adding these items. If you are going to connect the printer to your wireless network, purchase the optional Wireless print server. The NC2200w can be connected to the USB interface port of your printer. For more information, visit http://solutions.brother.com. If you are going to connect the printer to your network, buy the optional Network device.
LM44250012 Printed in China ©2004 Brother Industries, Ltd. ©1998-2004 TROY Group, Inc. ©1983-2004 PACIFIC SOFTWORKS INC. ALL RIGHTS RESERVED.
