Specifications

Revision C 16/01/96
Chapter 2 "PCL" - 12
Top offset registration
Esc&ll#Z (27)(38)(108)#(90) <1Bh><26h><6Ch>#<5Ah>
# stands for the distance in decipoints (1/720") that the top edge of the logical page is to be moved.
• Values for # may be in the range -32,767 to 32,767.
• The distance specified is relative to the logical page’s current position.
• # can be positive or negative. Use a positive number to move the logical page downwards on the physical page,
and a negative number to move it upwards.
Simplex/Duplex printing ( Only for HL-1260 )
Esc&l#S (27)(38)(108)#(83) <1Bh><26h><6Ch>#<53h>
# can be 0, 1, or 2.
• # = 0 indicates the Simplex printing.
• # = 1 indicates the Duplex - Long edge binding printing.
• # = 2 indicates the Duplex - Short edge binding printing.
• If the optional duplex unit is not installed to the printer, this mode is fixed at Simplex mode.
• This command setting is not saved in the printer's NV-RAM.
Paper Side Selection
Esc&a#G (27)(38)(97)#(71) <1Bh><26h><61h>#<47h>
# can be 0, 1, or 2.
• # = 0 indicates the next side. If there are the page which is in process, the printer finishes the process to the
page. If there are no page in process, this command is ignored.
Positive
Negative
[Long Edge Binding]
[Short Edge Binding]