Specifications

Revision C 16/01/96
Chapter 6 " IBM Proprinter XL " - 2
Command list
NUL Null 5
BEL Bell 5
ESC Escape 6
SP Space 6
BS Backspace 6
LF Line Feed 6
FF Form Feed 6
CR Carriage return 7
Esc5n Automatic line feed 7
DC1 Enable printer 7
EscQ22 Disable printer 7
EscQ3 7
EscCRmode Reset printer / change emulation mode 8
EscCR!#R User reset 8
EscEMn Paper Input Control 8
EscCn Set page length 9
EscCNULn Set page length 9
EscXmn Set left and right margins 9
EscNn Set perforation skip 10
EscO Cancel perforation skip 10
Esc0 Select 1/8" line spacing 10
Esc1 Select 7/72" line spacing 10
EscAn Select n/72" line spacing 11
Esc2 Activate n/72" line spacing 11
Esc3n Set n/216" line feed 11
EscJn Execute n/216" line feed 11
EscDn1n2n3...NUL 12
Set horizontal tab stops
EscBn1n2n3...NUL 12
Set vertical tab stops
HT Horizontal tab 12
VT Vertical tab 12
EscR Restore default tab settings 13
Esc7 Select character set I 13
Esc6 Select character set II 13
DC2 Set pitch to 10 cpi 13
Esc: Set pitch to 12 cpit 13
EscPn Proportional spacing 14
SI Set condensed character mode 14
EscE Set emphasized character mode 14
EscF Cancel emphasized character mode 14
SO Set enlarged character mode for a single line 15
DC4 Cancel enlarged character mode 15
CAN Cancel 15
EscWn Enlarged character mode 15
EscSn Set superscript or subscript character mode 16
EscT Cancel superscript or subscript character mode 16
Esc-n Underline mode 16
Esc_n Continuous overline mode 16
Esc[@n1n2n3n4n5n6 17
Select double-height / double-width mode
Esc\n1n2<character data> 17
Select character from the all character code table
Esc^<char-code> Select a character from the all character code table 17
EscI Select character font 18