Specifications

Revision C 16/01/96
Chapter 2 "PCL" - 3
Esc(s#V, Esc)s#V Seelcting the height 42
EscCR!#H, EscCR!#V Scaling the scalable fonts vertically or horizontally 43
Esc(s#S, Esc)s#S Selecting the style 43
Esc(s#B, Esc)s#B Selecting the stroke weight 44
Esc(s#T, Esc)s#T Selecting the typeface 44
Esc&p#X Transparent print data 45
Esc&d#D, Esc&d@ Underlining text 45
Esc&*c#D Font ID 46
Esc*c#F Operations on downloaded fonts 46
Esc(#X, Esc)#X Selecting a downloaded font 47
Esc)s#W Sending the font descriptor 47
Esc*c#E Sending a character code 61
Esc(s#W Sending a character descriptor and data 61
Using graphics 68
Esc*v#N Set source transparency 69
Esc*v#O Set pattern transparency 70
Esc*c#G Set area fill identity 71
Esc*c#W User-defined pattern command 71
Esc*p#R Set pattern reference point 72
Esc*c#Q User-defined pattern control 72
Esc*v#T Set pattern type 73
Esc*c#A, Esc*c#H Set rectangle width 74
Esc*c#B, Esc*c#V Set rectangle height 75
Esc*c#P Draw filled rectangle 76
Esc*t#R Set raster resolution 77
EscCR ## Set high resolution control 77
Esc*r#F Set raster image orientation 77
Esc*r#T Set raster area height 78
Esc*r#S Set raster area width 78
Esc*b#Y set raster y-offset 79
Esc*b#M Set compression mode 79
Esc*r#A Start raster transfer 84
Esc*b#W Send raster data 85
Esc*b#C Compress transfer graphics 85
Esc*rB End raster transfer 85
Esc*rC End raster transfer 85
Esc%#B Enter HP-GL/2 mode 87
Esc*c0T Set picture frame anchor point 87
Esc*c#Y Set picture frame vertical size 87
Esc*c#X Set picture frame horizontal size 87
Esc*c#L Specify vertical plot size 88
Esc*c#K Specify horizontal plot size 88
Macros 89
Esc&f#Y Macro ID 89
Esc&f0X Start macro definition 89
Esc&f1X End macro definition 90
Esc&f2X Execute macro 90
Esc&f3X Call macro 90
Esc&f4X Enable macro for overlay 90
Esc&f5X Disable macro for overlay 90
Esc&f6X Delete all macros 91
Esc&f7X Delete all temporary macros 91
Esc&f8X Delete macro 91
Esc&f9X Make macro temporary 91
Esc&f1030X Delete all macros from PCMCIA memory card 91
Esc&f1036X Delete macro from PCMCIA memory card 91
Esc&f1038X Save macro into PCMCIA memory card 91