Specifications

Revision C 16/01/96
Chapter 2 "PCL" - 2
Command list
Control Codes 6
Escape sequences 7
Esc&k#G Line Termination 8
Esc&s#C End-of-line wrap 8
EscY Display function mode 8
EscZ Display function mode 8
Environments 9
Job Control 10
Esc&l#A Page size 10
Esc&l#H Paper source 11
Esc&l#U Left long-edge offset registration 11
Esc&l#Z Top offset registration 12
Esc&l#S Simplex/Duplex printing 12
Esc&a#G Paper Side Selection 12
Esc&l#X Number of copies 12
Esc&l1T Job separation command 13
EscE Reset 13
EscCR FD Reset to factory default settings 13
EscCR!#R Reset to user settings 13
Escz Printer self test 14
Esc%-12345X Exit current emulation mode 14
EscCR## Change emulation mode 14
The Page 15
Esc&u#D Unit of measure 18
Esc&a#L Setting the left and right margins 19
Esc&a#M Setting the left and right margin 19
Esc9 Resetting the horizontal margins 20
Esc&l#E Setting the top margin 20
Esc&l#C Setting the vertical motion index (VMI) 21
Esc&k#H Setting the horizontal motion index (HMI) 21
Esc&l#D Setting line spacing 23
Esc&l#F Text length 23
Esc&l#P Page length 24
Esc&l#L Perforation skip 24
Esc&a#R Vertical positioning -rows 25
Esc*p#Y Vertical positioning - units 25
Esc&a#V Vertical positioning - decipoints 26
Esc&a#C Horizontal position - columns 26
Esc*p#X Horizontal position - units 27
Esc&a#H Horizontal position - decipoints 28
Esc&f#S Using the cursor position stack 29
Esc= Half line feed 29
Esc&l#O Logical page orientation 30
Esc&a#P Text direction 31
Using fonts 32
Esc(3@, Esc)3@ Selecting the default fonts 34
SI, SO Switching between the primary and secondary font 34
Esc*c#R Symbol Set ID Code Command 36
Esc(f#W Define symbol set 37
Esc*c#S Symbol Set Control Command 39
Esc(symbol set ID Select the symbol set 39
Esc(s#C, Esc)s#C Select the symbol set 40
Esc(s#P, Esc)s#P Selecting the type of character spacing 41
Esc(s#H, Esc)s#H Selecting the pitch 42