Specifications

Revision C 16/01/96
Chapter 3 "PJL" - 27
Variables Description Sample Value Range
DUPLEX Duplex mode ON, OFF
BINDING Returns the setting of binding edge
for duplex printing.
LONGEDGE, SHORTEDGE
FIRSTPRINT First print mode. This makes the
first print speed faster by moving the
polygon motor at Power On. Setting
to MIDDLE is effective only the first
page after the Power ON. Setting to
HIGH makes scanner moving
everytime.
NORMAL, MIDDLE, HIGH
DENSITY Returns the printing density level
from 1 to 15. The default value is 8.
1 (lighter) to 15 (darker)
LANG Returns the language for control
panel, status readback information.
ENGLISH, FRENCH, GERMAN,
DUTCH, SPANISH, ITALIAN,
FINNISH, NORWEGIAN,
PORTUGUESE, DANISH
CPLOCK Returns the lock status control panel.
If OFF, the control panel is
unlocked. If ON, the control panel is
locked.
OFF, ON
PASSWORD Password for lock to write on
NVRAM by DEFAULT/INITIALIZE
command.
0 to65535
ECONOMODE Toner Saving Mode OFF, ON
ECONOLEVEL Level for Toner saving mode. If set
to 1, approx. 50 % toner is saved. If
set to 2, approx. 25% toner is saved.
1, 2
MPTRAY MP Tray Priority For AUTO feeder
selection mode.
CASSETTE, FIRST
AUTOSLEEP Power Save Mode ON, OFF
TIMEOUTSLEEP Timeout for Power Save mode. The
printer goes into the power save
mode after time-out.
1 to 99
MEDIATYPE Media Type. The temperature of
fixing unit is adjusted depending on
this setting.
REGULAR, THICK,
TRANSPARENCY
HUMIDITY Depending on this setting, the fixing
voltage of the printer is adjusted.
LOW, HIGH