Specifications

Revision C 16/01/96
Chapter 3 "PJL" - 23
2) PCL-Specific Variables
The following values are PCL (HP LaserJet 4 emulation) specific and can be set and requested using
PJL. These variables must be set using LPARM : PCL option.
Variables Description Sample Value Range
PAPER Set the paper size. LETTER, A4, LEGAL,
EXECUTIVE, COM10,
MONARCH, C5, DL, JISB5,
A4LONG
ORIENTATION Set the orientation. PORTRAIT or LANDSCAPE
LEFTMARIN Set the left margin. 0 to 126 columns
RIGHTMARGIN Set the right margin 0 to 136 columns
TOPMARGIN Set the top margin 0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
BOTMARGIN Set the bottom margin. 0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
FORMLINES Set the number of lines. 5 to 128 lines
FONTSOURCE Set the font source to Internal fonts
or
I or S
FONTNUMBER Set the font number 0 to n
PITCH Pitch of the default font in units of
characters per inch. The pitch
value can be specified to two
decimal points
0.44, 0.45, 99.99
PTSIZE Height of the default font in units
of points. The point size is
significant to a quarter of a point
4.00, 4.25, .......999.75
SYMSET Set the symbol set. ROMAN8, ISOL1, ISOL2, ISOL5,
PC8, PC8DN, PC850, PC852,
PC8TK, WINL1, WINL2, WINL5,
DESKTOP, PSTEXT, VNINTL,
VNUS, MSPUBL, MATH8,
PSMATH, VNMATH, PIFONT,
LEGAL, ISO2, ISO4, ISO6,
ISO10, ISO11, ISO 14, ISO15,
ISO16, ISO17, ISO21, ISO 25,
ISO 57, ISO60, ISO61, ISO69,
ISO84, ISO85, WIN30, HPGERM,
HPSPAN, MCTEXT, OCRA,
OCRB, SYMBOL, WDINGS
AUTOLF Set the AUTO LF to ON or OFF ON or OFF
AUTOCR Set the AUTO CR to ON or OFF ON or OFF
AUTOWRAP Set the AUTO WRAP to ON or
OFF
ON or OFF
AUTOSKIP Set the AUTO SKIP to ON or OFF ON or OFF