Specifications

Revision C 16/01/96
Chapter 3 "PJL" - 21
2)PCL-Specific Variables
The following values are PCL (HP LaserJet 4 emulation) specific and can be set and requested using
PJL. These variables must be set using LPARM : PCL option.
Variables Description Sample Value Range
FONTSOURCE The valid values for FONTSOURCE are
I (Internal Fonts)
C(Cartridge Fonts)
C1 (Card Fonts)
S (Permanent Soft Fonts)
If the specified value becomes invalid, it
is automatically changed to the default
value.
I, C, C1, S,
FONTNUMBER Font number. This value can be seen on
the Print Font Test selected from the
Control Panel. This value is
automatically changed to the lowest value
whenever the FONTSOURCE setting is
changed.
0, 1, 2, ..n
PITCH Pitch of the default font in units of
characters per inch. The pitch value can
be specified to two decimal points
0.44, 0.45, 99.99
PTSIZE Height of the default font in units of
points. The point size is significant to a
quarter of a point
4.00, 4.25, .......999.75
SYMSET Symbol set ROMAN8, ISOL1, ISOL2,
ISOL5, PC8, PC8DN, PC850,
PC852, PC8TK, WINL1,
WINL2, WINL5, DESKTOP,
PSTEXT, VNINTL, VNUS,
MSPUBL, MATH8,
PSMATH, VNMATH,
PIFONT, LEGAL, ISO2,
ISO4, ISO6, ISO10, ISO11,
ISO 14, ISO15, ISO16,
ISO17, ISO21, ISO 25, ISO
57, ISO60, ISO61, ISO69,
ISO84, ISO85, WIN30,
HPGERM, HPSPAN,
MCTEXT
3) PostScript-Specific Variable
The currently defined PostScript specific variable is listed as follows. This variable can be set using the
LPARM : POSTSCRIPT option.
Variable Description Sample Value Range
PRTPSERRS The printing of a PostScript error page is
enabled or disabled by this variable
OFF, ON