User Manual
BrosTrend™ www.trendtechcn.com
7 / 22
Input the WiFi Key (WiFi Password), and then Connect to the WiFi
Network.
3.2.1.3 Once you are connected to the WiFi network successfully, your
information for this Network will be stored in this software, you can find
it in “Profile”; Every time when you turn on your PC, BrosTrend USB
WiFi Adapter will connect to your WiFi network automatically with
these information stored. In case you connect to more than one WiFi
networks successfully, you can choose the corresponding Profile of
them in this software.
4. Frequently Asked Questions for Windows PC
4.1 Ask: I plug BrosTrend USB WiFi Adapter to the USB port of my PC and it
does not work. What shall I do?
Answer: One of the below may cause the BrosTrend USB WiFi Adapter fail to
work, please check and try one or more of the below solutions:
4.1.1 Please try another USB port of your PC.
4.1.2 Please make sure that you have installed the driver on your PC. This
adapter support the below Operating Systems, you need to install the
correct driver for it:
-Windows:Win10 32/64, Win8.1 32/64, Win8 32/64, Win7 32/64, Vista
32/64, XP 32/64, 32Bit or 64Bit OS
-MAC OSX
-Linux
4.1.3 Please make sure that you are not installing more than one WiFi adapter
drivers in one PC, this will cause BrosTrend USB WiFi Adapter fail to work
though you have installed driver for it. Please remove other WiFi adapters’
drivers before installing driver for BrosTrend USB WiFi adapter. While
please DO NOT uninstall the driver of your WiFi adapter which is
integrated on your PC. You can find more about this in Part 2.1.
4.1.4 Please make sure that you did not Disable BrosTrend USB WiFi Adapter
in the Network configuration of your PC. You need to make sure that it is
Enabled. You can check this on your PC as below:
NetworkPropertiesOn the left hand side of the menu, click “Change
Adapter Settings”Find BrosTrend USB WiFi Adapter under the name of
“Realtek 8812AU/8811AU Wireless LAN 802.11ac USB NIC”, put your
mouse on it and click the right button of your mouse Press Enable to
turn BrosTrend USB WiFi Adapter ON, then it works; If press Disable you
will turn BrosTrend USB WiFi Adapter OFF and it will not work.
4.1.5 In case the LED of BrosTrend USB WiFi Adapter is on, this indicates that
the driver is installed on your PC. You need to refer to the solution in Part
4.1.3 and Part 4.1.4
4.1.6 In case the LED of BrosTrend USB WiFi Adapter is NOT ON, this indicates
that the driver is NOT installed correctly on your PC or adapter is not plug
correctly on your PC. You need to refer to the solutions in Part 4.1.1, Part