Instruction Manual

200747_1TB 22
Maintenance
Door adjustment
In the case of the door rope not providing an adequate seal to the room, products
of combustion may enter the room (see warning notes), to ensure an adequate
seal the door may need to be periodically adjusted as the rope seal wears with
use.
Hinge Adjustment (seal on Left hand side is not compressed):
SD1 AND CD1 MODELS ONLY
• Ensure that the stove is cold before proceeding
• Remove the door by lifting the door
off the hinges
• Loosen the Hinge Locking nut inside
the stove
• Rotate the hinge by 1 turn (clockwise
to tighten seal, anticlockwise to
loosen seal) on both the top and
bottom hinge, this ensures that the
door seal will compress or loosen
evenly
• Re fit the door back onto the hinges
and tighten the locking nut inside the
stove
• Check the seal provides an
adequate seal.