Operating instructions

MS07-11 Issue 4b 15
Recommended Fuels
This appliance has obtained approval from HETAS Ltd., for burning –
* Split Hardwood logs not exceeding 35cm in length and not over 20% moisture content.
Approval does not cover the use of other fuels either alone or mixed with the suitable fuels
listed above.
Do NOT burn wet wood, This will give a poor heat output and will cause heavy deposits
of soot and tar to accumulate on the glass and throughout the stove and flue. The coating
of soot and tar in the chimney is volatile creating a high risk of chimney fires. A growing
tree contains a high percentage of water, the wood needs to be dried out (seasoned)
before it is suitable for burning (this can take several years). Wood logs are best stored in
a stack, sheltered from the weather, in a well ventilated area and raised off the ground.
This allows the air to circulate and prevents mildew.
Do NOT burn Pallet Wood, or any other wood containing glue, paint or any other
chemicals. Burning such fuel will result in damage to your appliance, any such damage will
not be covered by the products warranty.