Specifications


6SHFLILFDWLRQV
In the UK these stoves have been approved by HETAS Ltd as intermittent heating
appliances for burning Hardwood logs only.
European standards need to be complied to when installing this appliance.
MS10-11C Issue 2 5
Appliance Weight (Kg) 320
Nominal total heat output
25.9
Nominal heat output to room (kW) 10.1
Nominal heat output to water (kW) 15.8
Flue diameter MINIMUM 150mm/6”
Efficiency % 77.9
Maximum fuel load of wood to maintain nominal output (Kg / hr) 5.69
Maximum wood length – Must be Split Logs 35cm
20.00%
Temperature exhaust gas – wood (ºC) 241
Optimal working temperature zz
30
Flow & return pipe fitting (Female) 1” BSP
SCWS flow & outlet pipe fittings (Male) ߢ%63
Flue draft Pressure (Pascals)
14 – 20
Minimum flue height in meters (straight) 5
Maximum working temperature zz
Maximum allowable water pressure (bar)
3
Wood Moisture Content /HVVWKDQ
Boiler capacity (Litres)