Specifications


5HFRPPHQGHG)XHOV
This appliance has obtained approval from HETAS Ltd., for burning –
* Split Wood logs not exceeding 35cm in length and not over 20% moisture content.
Approval does not cover the use of other fuels either alone or mixed with the suitable fuels
listed above.
Do NOT burn wet wood, This will give a poor heat output and will cause heavy deposits
of soot and tar to accumulate on the glass and throughout the stove and flue. Tar and soot
build-ups will also insulate the boiler causing poor heat transfer to the water, the coating of
soot and tar in the chimney is volatile creating a high risk of chimney fires. A growing tree
contains a high percentage of water, the wood needs to be dried out (seasoned) before it
is suitable for burning (this can take several years). Wood logs are best stored in a stack,
sheltered from the weather, in a well ventilated area and raised off the ground. This allows
the air to circulate and prevents mildew.
ildew.
Do NOT burn pallet Wood, or any other wood that contains glue, paint or any other
chemicals. Burning such fuels may result in damage to the appliance. Any such damage
will not be covered by the manufacturers warranty.
MS10-11C Issue 2 33