User's Manual

7
coMPaTIbIlITY
PoWeR anD Dock
1. Connect the ADAPTER cord to the Scanner, and plug the ADAPTER into
a power outlet.
2. Press and hold the POWER BUTTON for up to 3 seconds to turn the Scanner
on. The POWER LED will blink blue for a moment and then remain solid.
3. Turn on your device and dock it carefully on the 30-PIN CONNECTOR
on the scanner. Make sure it sits firmly in place.
4. To turn the Scanner off, press and hold the POWER BUTTON again.
The POWER LED will shut off.
Notes:
• Do not dock device to the Scanner when the POWER LED is blinking.
Wait until the blinking stops.
• Check the battery level in the upper-right corner of your device’s home
screen. Make sure it’s at least above 20% when docked. If not, please
charge the battery prior to docking.
• Do not connect the Scanner to a USB port in case of insufficient power.
iPod touch
®
(4th generation)
iPhone 4S
iPhone 4
iPad (3rd generation)
iPad 2
iPad