iConvert Scanner V2 For iPad® tablets and iPhone® devices
Table of contents Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Included Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION • T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE • T THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
DANGER To reduce the risk of electric shock, burns, fire or injury: 1. Do not use while bathing or in a shower. 2. Do not place or store unit where it can fall or be pulled into a tub or sink. 3. Do not place in, drop or submerge in water or other liquid. 4. Do not reach for unit that has fallen into water. Unplug it immediately. 5. C are should be taken so that objects do not fall and liquids are not spilled onto the unit. WARNING 1.
7. T he unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves or other units (including amplifiers) that produce heat. Avoid placing on top of stereo or computer equipment that radiates heat. 8. N ever block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. 9. Do not overload the electrical outlet.
Location of Parts and Controls 1. Power LED 2. Power Button 3. Paper Guides 4. Feed Slot 5. 30-Pin Connector 1 4 2 5 6. Mini USB Power Port 7. Exit Slot 8.
Included accessories Calibration Sheet Protective Sleeve Stopper Strip Lens Cleaner Roller Cleaner Power Adapter 6
Compatibility iPod touch® (4th generation) iPad (3rd generation) iPhone 4S iPad 2 iPhone 4 iPad Power and dock 1. C onnect the Adapter cord to the Scanner, and plug the adapter into a power outlet. 2. P ress and hold the Power button for up to 3 seconds to turn the Scanner on. The Power LED will blink blue for a moment and then remain solid. 3. T urn on your device and dock it carefully on the 30-pin connector on the scanner. Make sure it sits firmly in place. 4.
Download app (First time use) 1. A fter you power on the Scanner, and power on and dock your device, a message should appear on your device’s screen which will guide you to the App StoreSM for the free iConvertScan+ app. Note: If you do not receive the App Store message go to the App Store and search for Brookstone iConvertScan+. 2. Follow the on-screen instructions to complete the installation. 3. U pon completion, the iConvertScan+ icon will appear on your device’s home screen.
Calibrate To get the best material recognition results, please follow the steps below before first use and periodically during the Scanner’s life. 1. Remove the film on the front and back of the calibration sheet before use. 2. Make sure the calibration sheet is clean and free of dust before use. 3. Tap the Settings icon in the top right hand corner of your device’s screen. 4. Choose Calibrate. 5.
Scan and save Scan 1. Tap the iConvertScan+ app on your device’s screen to open. 2. A djust the Paper Guides to center the photo/document, and to ensure it will load straight into the feed slot. 3. I nsert a photo/document, facing UP, into the center of the feed slot of the scanner until it’s gripped by the roller. 4. T ap the Scan button on your device’s screen. The scan starts with the real-time preview of the photo/document on the screen. 5.
Using the protective sleeve Old photos or documents may be fragile, curled or even bent. To protect them from possible damage during scanning, use the protective sleeve (included). 1. Peel back the film on the protective sleeve before use. 2. P lace the photo inside the protective sleeve face up, so the image shows through the clear film. Carefully push the film over the photo, avoiding bubbles and creases. Slide the tongue at the edge of the plastic into the slot to secure. 3.
Cleaning the roller 1. Tap the Settings icon in the top right hand corner of your device’s screen. 2. Tap Clean. 3. G rip the Roller Cleaner by the Stopper Strip, with the Stopper Strip facing DOWN. 4. Insert the Roller Cleaner’s edge into the Feed Slot. 5. T ap the Clean button. The Roller Cleaner will be pulled into the slot, then will be halted by the Stopper Strip, allowing the roller to spin and clean itself on the Roller Cleaner. 6.
Care and maintenance (continued) Cleaning the lens 1. P ower off the Scanner and remove your device. 2. Hold the handle of the Lens Cleaner. 3. I nsert the Lens Cleaner, with the fabric side facing UP, all the way into the Exit Slot of the Scanner. 4. S lide the Lens Cleaner back and forth, all the way to either end of the Exit Slot, to clean the lens. Repeat a few times. Charging your device 1. Power off the Scanner before docking your device. 2.
FAQS No power • Check if the USB cable is connected properly, and the Scanner is turned on. • T he scanner will turn off automatically when the device connected is in sleep mode. To resume the power, wake your device, and then turn on the Scanner. The Scanner does not respond when device is docked • Make sure the iConvertScan+ app is installed and your device is docked correctly. • Check if your device is off or locked. Refer to your device’s manual to unlock.
FAQS (continued) Cannot scan and save • Charge your device if the battery has less than 20% power. • C lose other running apps on your device to release memory. Refer to its own manual to close running apps. • Make sure the scan app privacy setting for photo area on your device is set to “ON.” Specifications Scanner Type . . . . . . . . . . . . . . . . . . . . . . . . . . CIS Sheet-fed scanner Light Source . . . . . . . . . . . . . . . . . . . . . . . .
Power Consumption . . . . . . . . . . . . . . . . . . . . 1 0W (5V, 2.1A Maximum) under the charging mode for iPad. 5W (5V,1.0A Maximum) under the charging mode for iPhone/iPod touch. File Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . JPEG Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.1" W x 4.4" D x 2.8" H Weight . . . . . . . . . . . . . . . . . . . . . . . . . .
One (1) Year Limited Warranty Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is.
Find thousands more great ideas online 811508 Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone.
