iConvert® Instant Scan Digital Frame Scan, save and enjoy—no computer needed!
Table of contents Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Remote Control Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CAUTION •T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. THERE ARE NO SERVICEABLE PARTS INSIDE. •T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
DANGER To reduce the risk of electric shock, burns, fire or injury: 1 . Always unplug the unit from the electrical outlet immediately after using. 2 . Do not use while bathing or in a shower. 3 . Do not place or store unit where it can fall or be pulled into a tub or sink. 4 . Do not place in or drop into water or other liquid. 5 . Do not reach for unit that has fallen into water. Unplug it immediately. 6 .
WARNING 1 . Keep away from children. This is not a toy. 2 . Use this unit only for its intended use as described in this manual. 3 . Unplug this unit during lightning storms or when unused for long periods of time. 4 . Never drop or insert an object into any opening. 5 . Protect the power cord from being walked on or pinched, particularly at plug outlets, convenience receptacles and the point where it exits the unit. 6 . Do not allow cord to touch hot surfaces.
Fcc INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user’s authority to operate this device.
Location of Parts and Controls 1 2 3 4 5 6 7 8 9 14 7 10 15 11 12 13 16
Location of Parts and Controls 1 . Remote Control Sensor: Receive the signals from remote control. 2 . Setup: Press to access the setup menu*. 3 . Up: Moves up in the menus*. 4 . OK: Press to make selections in the menus or setting modes*. 5 . Down: Moves down in the menus*. 6 . EXIT: Return to the previous menu or stop the playback under the Music mode*. 7 . SCAN Press to scan a photo*. 8 . Photo feed slot: Where you insert your photo for scanning. 9 .
Location of Controls 1 2 8 3 9 4 5 10 6 11 7 9
Location of Controls 1 . Setup: Press to access the Setup Menu. 2 . Mode: Press to return to the Main Menu. 3 . / 4 . Play: Press to playback the selected file. Pause: Press to pause the current playback file. OK: Press to make the selection in the menu or setting modes. 5 . Rotate: Press to rotate the photo by 90º clockwise in Browse mode. 6 . Z oom: Press to enlarge photo in Photo mode.
Remote control Battery installation 1 . I f the remote control is being used for the first time, remove the insulating mylar strip from the battery compartment to allow contact. 2 . To replace the battery, press and hold the battery release tab in the direction of arrow as shown in the diagram on the back of the remote control. 3 . Pull out the battery holder completely. 4 . Remove the old battery. 5 . Place a new CR2025 battery in the battery tray, positive side up. 6 .
Scanning a photo 1 . Power on the unit. 2 . Press the SCAN button to enable the scan function. 3 . Adjust the Paper Feed Guide on the scanner to the size of your photo. 4 . I nsert the picture in the Protective Sleeve (if needed) face up and push it forward into the Photo Feed Slot until the picture is automatically pulled in and scanned. 5 . D o not press any buttons or touch photo while the scanning is in progress. Wait until the process is complete. Note: This scanner supports photo sizes from 1.
Save this Image Press or to highlight Save This Image, then press to save. A status message will appear on the screen to indicate when the photo is saved. Image showing the photo being saved is in progress. Note: Saved scanned images are saved into the Scanned Image folder on the frame. The saved file will be named with a 4-digit number, with Scan as a prefix which runs from 0001 to 9999. For example, scan_0001.jpg. When the counter reaches 9999 it simply starts over from 0001 again.
Exit Scan Mode Press or to highlight Exit Scan mode, then press to exit and return to the Scanned Image mode. The last scanned photo will not be saved in the internal memory. Select a storage device This photo frame can play back content from internal and external memory devices such as USB flash drives, and memory cards (MMC, SD, MS/MS pro, CF type I, and xD cards) typically used with digital cameras. More than one external memory device can be inserted at the same time.
PHOTO Thumbnail mode 1. F rom the MAIN MENU, select Photo and press to enter. All photos stored in the selected storage device will be displayed via thumbnail mode first. / / / buttons to 2. U se the navigate thumbnails. Highlight the photo you would like to view and press to view it full screen. PHOTO THUMBNAIL MODE SETTINGS 1 . D uring the thumbnail mode, you may select a photo then press to access the Settings menu. / / / buttons to 2.
Photo thumbnail Mode Settings Press to access the Settings menu. When finished, press MENU OPTIONS to exit. DESCRIPTIONS Copy to This option allows you to copy the selected photo and/or scanned image from the current memory device to other available memory device(s). Available memory devices will be displayed when this option is selected. Delete To delete the selected photo, select Yes. Otherwise choose No to cancel.
Mark: Allows you to select multiple photos to copy or delete. Select Mark Several: if you want to select multiple photos. It will bring you back to the / / / buttons and press OK to thumbnail screen for photo selection. Use the make your selection (see below). A check mark will appear on all selected photos. Press to return to Settings menu to continue Copy to, or Delete function. Note: Select Mark Several selects thumbnails currently viewed on screen. It cannot select more than 15 photos at a time.
Manual Rotate: Photos can be manually rotated by pressing the button (on the remote) in full screen mode. Each press of this button will rotate the photo by 90º clockwise. Auto Rotate: Landscape or portrait display of a photo will be automatically switched according to the unit orientation. If the horizontally placed photo frame is rotated right by 90˚, the displayed photo will automatically rotate counter-clockwise by 90˚.
Photo Browse Mode Settings Press to access the Settings menu. When finished, press to exit. Menu options Descriptions Copy to This option allows you to copy the selected photo from the current memory device to other available memory device(s). Delete To delete the selected photo, select Yes. Otherwise choose No to cancel. Print Select Yes to print the current photo. Otherwise choose No to cancel. To print, the frame needs to be connected to a PictBridgeTM compatible printer.
Photo slideshow mode Supported photo and audio format: JPEG and MP3. 1 . Press under any mode to begin a Slideshow. 2 . Press to exit Slideshow mode. Slideshow settings (see below and on chart on the following page). 1 . During the slideshow mode, press to bring up the Settings menu. 2 . U / / / buttons to browse through available options, se the and press to select your choice when highlighted.
Slideshow mode settings Press to access the Settings menu. When finished, press to exit. Menu options Descriptions Display Image Size • Select Normal to display photos in their original aspect ratio. Black bars may appear on the left/right or top/ bottom sides of the screen, depending on whether the photos are taken in landscape or portrait format. • Select Full Screen to display 4:3 by full screen. For non 4:3 photo, a small part of the photos on the left/right or top/bottom sides may be cropped.
Scanned image Supported storage format: JPEG 1 . B y default, photos that you have scanned are stored in the Scanned Image folder in the internal memory. To browse the scanned photos, select the Scanned Image from the Main Menu and press to enter. ll the scanned photos will be displayed in Thumbnail mode. From here you 2 . A can view photos individually (in Browse mode) or as a Slideshow.
Transfer the scanned images to a computer When connecting to a PC, the photo frame allows you to transfer music, video and photo files between the photo frame’s internal memory, a memory card inserted and PC. To copy the scanned images to a computer from the internal memory, please connect the unit to a computer via the mini USB cable (supplied). 1 . Press POWER button to power on the unit. ress 2 . P Press to bring up the System Setup menu under Main Menu. or to select USB Link to, then press or . 3 .
5. I t may take a few seconds for Windows® to recognize the photo frame. When the photo frame is recognized, 3 new removable drives should appear in Windows® Explorer. One of these drives is labeled SCANFRAME, representing the internal memory of the photo frame. The other 2 drives are labeled Removable Disk, representing CF type I card and SD/MMC/MS/xD card in sequential order. Images scanned onto the frame will appear in a folder called “Scanned Images” in the SCANFRAME folder.
Music Supported audio format: MP3. Current mode Selected audio Play back status: Play Pause Stop Current page/ Total pages Volume bar Audio elapsed time/ Audio total time 1 . U se the / / / buttons to select the Music under the Main Menu, then press to enter. All the available music files in the selected memory device will be listed on the screen. 2 . Press 25 or to highlight the desired music file, then press to playback.
Audio mode menu Press to access the Settings menu. When finished, press to exit. Menu options Descriptions Copy to This option allows you to copy the selected music from the current memory device to other available memory device(s). Delete To delete the selected music, select Yes. Otherwise choose No to cancel. System Setup Bring up the System Setup menu. Note: Settings menu will not appear when music is playing, including volume adjustment.
Video Supported video format: MPEG-1 and MPEG-4 Current mode Selected video Current page/ Total pages Volume bar 1 . U se the / / / buttons to select Video under the MAIN MENU, then press to enter. All the available video files in the selected memory device will be listed on the screen. 2 . P or ress to playback. to highlight the desired video file, then press 3 . P to fast backward or press ress during playback.
Video mode menu Press to access the Settings menu. When finished, press to exit. Menu options Descriptions Copy to This option allows you to copy the selected video from the current memory device to other available memory device(s). Delete To delete the selected video, select Yes. Otherwise choose No to cancel. System Setup Bring up the System Setup menu. Calendar/Clock Use the / / / buttons to select Calendar under the Main Menu, then press to enter.
Calendar mode menu Press to access the Settings menu. When finished, press to exit. Menu options Descriptions Set Clock Set the system time for the unit. Press and buttons on the remote, or the OK button on the scanner, to switch between the HOUR, MINUTE and 12/24 fields. Press and to change the number. When the correct time is showing, press OK to confirm. IMPORTANT: The clock will only maintain the correct time and date when powered on.
Set Date Set the system date for the unit. Press and to switch between the DAY, MONTH and YEAR fields. Press and to change the value. When finished, press OK to confirm. Slideshow Photo This option allows you to activate slideshow in the clock/calendar display. System Setup Bring up the System Setup menu.
System setup 1 . U se the / then press 2 . Press / / / buttons to select Setup under the MAIN MENU, to enter. / / buttons to select or cycle through available options (see below). Setup mode menu Option Description Language Choose from available On Screen Display languages. Sleep Timer Select a time to automatically turn off the frame, or select off to not use this option. USB Link To Use this option to connect the frame to your PC or printer.
Printing photos 1 . Press POWER button to turn on the unit. 2 . Press to bring up the System Setup menu under MAIN MENU. Press or to select USB Link To, then press 3 . Press or to select Printer, then press or . . se the mini-USB cable (included) and connect it to the back of the unit 4 . U and the other end to a PictBridgeTM compatible printer. Note: • The print function only works with printers that are PictBridge™ compatible.
Frequently Asked Questions Q. Why is the clock not keeping the time? A. The clock will only maintain the correct time and date when powered on. Q. How far away can I use the remote control? A. Around 10 feet within an angle of 30 degrees at both left and right. Q. My remote control doesn’t work. A. You may need to change the battery. Replace with a new lithium 3V-model number CR2025. Q. Why can’t I display some of my photos? A. Some photo/image file formats are not supported.
Frequently Asked Questions (continued) Q. Why does the Scan function not work? • A. #1 Make sure the scanner guide is adjusted properly to allow you to insert your photo. • A. #2 Gently push the photo until it is grasped and pulled through the scanner and into the Photo Feed Slot. Q. Date/Time settings are lost. A. The set Date/Time can be maintained for approx. 2 days (48 hours) after the unit is switched off because battery backup is not supported. Q. Why does the print function not work? A.
Specifications Panel Specification Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8" Aspect ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:3 Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800 x 600 pixels Power External AC Power Adapter . . . . . . . . . . . . . . . . . .
Specifications (continued) Scanner Scanning Module Type, Size . . . . . . . . . . . . . Scan photo size . . . . . . . . . . . . . . . . . . . . . . . . . Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Storage Format . . . . . . . . . . . . . . . . . . . . . . . . . Sheet Feed Type, A6 1.5" x 2" ~ 4" x 6" Up to 1200 x 1800 pixels, 300 dpi JPEG Supported Printer Printer standard . . . . .
One (1) Year Limited Warranty Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
but Brookstone, in so far as permitted by law, provides these products “as is.
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.
