Operation Manual

CHARGING THE KEYBOARD
SYNCING THE BLUETOOTH
®
KEYBOARD TO YOUR
iPad Tablet
2. The LED will illuminate in red during charging, and shut off when charging is
complete.
3. The keyboard takes approximately 1.5 hours to charge for up to 280 hours of use.
Note: The charging LED indicator will blink when your Bluetooth
®
Keyboard
Case’s battery is low and needs to be recharged.
Charging LED
Bluetooth
®
LED
Caps Lock LED
Charging Outlet
Note: The Bluetooth
®
Keyboard will automatically go into standby mode
after 15 minutes of inactivity in order to preserve battery life. Just press any
key to reactivate the keyboard.
1. Plug the USB charging cable (included) into the charging outlet and into a USB
outlet (see the illustration below for part locations).
1. Power on your iPad.
2. Press the Power button on the Bluetooth
®
Keyboard. The Blue LED will shut
off after a few seconds.
3. Press the Fn+ on the Bluetooth
®
Keyboard, the Blue LED will fash.
4. Select the “Settings” icon on your iPad Tablet’s screen.
5. Locate and select “Bluetooth” in your iPad Tablet’s “General” menu.
6. Under “Devices” on your iPad Tablet, selcet the Brookstone Bluetooth
®
Keyboard.
7. The iPad Tablet screen should now show the Brookstone Bluetooth
®
Keyboard
has connected successtully.
8. If your iPad Tablet goes into standby mode, the Bluetooth
®
Keyboard should
still be synced. If you power-off your iPad Tablet you may need to re-sync. If you
use the Bluetooth
®
Keyboard with a new iPad Tablet, or it doesn’t connect
properly, follow the setps above to re-sync.
5 6