Use 2 People VERTICAL CHANNEL UPHOLSTERED WOOD PLATFORM BED Note: Do not assemble using power tools. “This can cause the bolts to be overexertion ASSEMBLY INSTRUCTIONS ® Headboard -1 pc Foot board Panel -1pe © side Rail (Left) -1pc ~~ e Side Rail (Right) -1 pc © Leg Plate 4 pes = ® Bed Slats 1st o® 15mm Allen Bolt Whoopees Fulfillment pes King -PCs (= © sooner 1m © Spring Washer 24 pes @ M5 Allen Key 1p @® Flat Washer Center Rail Bracket ® Mé4 Allen Key 1 pc Twin 24 pes.
Fasten the the Leg Plate ©. Attach the Center Rail Bracket?) to the Headboard Panel ® and Foot board Panel (8).
STEP 3 Attach Side Rails Leg Plates using 50mm Bolt®with a lock Washer @ and a Flat Washer STEP 4 Attach Side Rails Es @ to Headboard/Footboard panels using 20mm Bolt ® with a Lock Washer ® and a Flat Washer ® .
Attach Leg Plate(©) to Headboard/Footboard panels using 50mm Bolt @ with a Lock Washer ® and a Flat Washer 4 0) Attach the Adjustable Foot@to the Support Leg ®. Insert Barrel Support Insert 90mm Bolt® (100mm for Full) through Center Support Bar(®) and into Barrel Nut & tighten.
STEP 7 | Insertions Center Rail Bracket @to attach Center Support Bar. STEP 8 | Insert screws®into Bed slat using diagram below. Fasten to Side Rail cleat and Center Support Bar.
LIMITED 2-YEAR WARRANTY WHAT IS COVERED This warranty covers any defects in materials or workmanship, with the exceptions stated below. HOW LONG COVERAGE LASTS This warranty runs for two (2) years from the date of purchase. WHAT IS NOT COVERED The warranty applies only to the original purchaser and does not cover: (a) wear and tear; (b) improper maintenance, misuse, or alteration; (c) repair by unauthorized representatives; (d) damage resulting from transit or handling: or (e) transportation costs.
