Assembly instructions

Drop Lift Wall Rack
Item Description Qty
1 Wall bracket 2
2 M3×5 screw 2
3 Knob assembly 2
4 #10×1” screw 8
5 Washer 2
1) Fasten wall bracket (1) to wall using four screws (4) into wall studs if possible. If unable to
locate wall studs we recommend using hollow wall screw anchors.
2) Spacing of rack sections should be equal to the length of the clamps being used plus
approximately 1/2”.
3) Attach knob assembly (3) to wall brackets (1) using screw (2) and washer (5) to keep clamps
from sliding off bracket.