Owner's manual

2-6
Brooks
®
Models 5964, 5850EM
Section 2 Installation
Installation and Operation Manual
X-TMF-5964-5850EM-MFC-eng
Part Number: 541B121AHG
November, 2008
Pin No. Function Color Code
1 Command Common Black
2 0-5 Volt Signal Output White
3 Not Used/External Valve Return* Red
4 Valve Off Green
5 +15 Vdc Supply Orange
6 -15 Vdc Supply Blue
7 Valve Test Point/Purge Wht/Blk
8 Command Input Red/Blk
9 Supply Common Grn/Blk
10 0-5 Volt Signal Common Org/Blk
11 +5 Volt Reference Output Blu/Blk
12 Valve Override Blk/Wht
13 Not Used Red/Wht
14 Chassis Ground Grn/Wht
15 Not Used** Blu/Wht
*Jumper Selectable - Refer to Figure 3-7 or 3-8.
**Jumper Selectable -Remote Transducer input on standard response PC board only.
Refer to Figure 3-8.
* This pin is used for Valve Common on Unit replacement PC Board.
** Remote Transducer In on 3 second response PCB only. Refer to Figure 3-6.
*** Jumper selectable. Refer to Figure 3-5 or 3-6.
SLOT
110986
SLOT
5432LABCD
Component Side
of PC Board
EFJK
Non-Component Side
of PC Board
Figure 2-1 Card Edge Connector
Chassis Ground 1 A Command Input
Flow Signal Common* 2 B Command Common
Flow Signal Output 3 C Supply Common
+15 Vdc Supply 4 D Valve Test Point
Not Used** 5 E Not Used
Not Used 6 F -15Vdc Supply
Slot 7 H Slot
Not Used 8 J Not Used
Valve Override 9 K Not Used
5V Ref. or Valve Return or Not Used***10 L Valve Off
Figure 2-3 D-Connector Shielded Cable Hookup Diagram - Voltage I/O Versions
1
15
9
8