User's Manual

Product Manual - RFID Reader UF70 Certum 150
Chapter 7
Operation
Parameter 165
(0xA5)
RF Interface Multiplexing Exposure Time 4
Dwell time on the antenna port, which is defined as the first list entry of the
multiplexing antenna port list (par. RF Interface Multiplexing Antenna Port 4).
The dwell time indicates how long an inventory is performed on an antenna port
(only for polling actions).
Value range: 0 to 65,535 in ms
Default: 100 ms
Parameter 166
(0xA6)
RF Interface Multiplexing Exposure Time 5
Dwell time on the antenna port, which is defined as the first list entry of the
multiplexing antenna port list (par. RF Interface Multiplexing Antenna Port 5).
The dwell time indicates how long an inventory is performed on an antenna port
(only for polling actions).
Value range: 0 to 65,535 in ms
Default: 100 ms
Parameter 167
(0xA7)
RF Interface Multiplexing Exposure Time 6
Dwell time on the antenna port, which is defined as the first list entry of the
multiplexing antenna port list (par. RF Interface Multiplexing Antenna Port 6).
The dwell time indicates how long an inventory is performed on an antenna port
(only for polling actions).
Value range: 0 to 65,535 in ms
Default: 100 ms
Parameter 168
(0xA8)
RF Interface Multiplexing Exposure Time 7
Dwell time on the antenna port, which is defined as the first list entry of the
multiplexing antenna port list (par. RF Interface Multiplexing Antenna Port 7).
The dwell time indicates how long an inventory is performed on an antenna port
(only for polling actions).
Value range: 0 to 65,535 in ms
Default: 100 ms