User's Manual

Product Manual - RFID Reader UF70 Certum 137
Chapter 7
Operation
Parameter 102
(0x66)
ETSI Channel List Antenna 2
This parameter specifies all ETSI channels of antenna port 2 to be used. The
channel switching mode par 0x69 must thereby have a value of 1 so that the
relevant list of the corresponding antenna port is used. The ETSI channel list of
antenna port 1 can contain up to 16 entries.
Value range: 0x00 to 0x0F
0x00 no channel
0x01 ETSI channel 1 (865.1 MHz)
0x0F ETSI channel 15 (867.9 MHz)
Default: Channels 0x04, 0x07, 0x0A, and 0x0D
Parameter 103
(0x67)
ETSI Channel List Antenna 3
This parameter specifies all ETSI channels of antenna port 3 to be used. The
channel switching mode par 0x69 must thereby have a value of 1 so that the
relevant list of the corresponding antenna port is used. The ETSI channel list of
antenna port 1 can contain up to 16 entries.
Value range 0x00 to 0x0F
0x00 no channel
0x01 ETSI channel 1 (865.1 MHz)
0x0F ETSI channel 15 (867.9 MHz)
Default: Channels 0x04, 0x07, 0x0A, and 0x0D
Parameter 104
(0x68)
ETSI Channel List Antenna 4
This parameter specifies all ETSI channels of antenna port 4 to be used. The
channel switching mode par 0x69 must thereby have a value of 1 so that the
relevant list of the corresponding antenna port is used. The ETSI channel list of
antenna port 1 can contain up to 16 entries.
Value range 0x00 to 0x0F
0x00 no channel
0x01 ETSI channel 1 (865.1 MHz)
0x0F ETSI channel 15 (867.9 MHz)
Default: Channels 0x04, 0x07, 0x0A, and 0x0D