User's Manual

Product Manual - RFID Reader UF70 Certum 136
Chapter 7
Operation
Parameter 98
(0x62)
Error ‘Unexpected’ (read only)
Internal parameter that can only be read. Setting the internal parameter causes
error 9 (unexpected) to be output only once successively.
Default: 0x01 (active)
Parameter 99
(0x63)
Factory Reset / Fine Version
The reader can be placed in the default status via this parameter. Only value 0x00
is approved here! However, the parameter delivers the fine version of the
software upon a query.
Default: 0x00 (Fine version 0)
Parameter 100
(0x64)
Global ETSI Channel List
This parameter specifies all ETSI channels to be used when the global list (par
0x69 channel switching mode) has the value 0. The global ETSI channel list can
contain up to 16 entries.
Value range: 0x00 to 0x0F
0x00 no channel
0x01 ETSI channel 1 (865.1 MHz)
…
0x0F ETSI channel 15 (867.9 MHz)
Default: Channels 0x04, 0x07, 0x0A, and 0x0D
Parameter 101
(0x65)
ETSI Channel List Antenna 1
This parameter specifies all ETSI channels of antenna port 1 to be used. The
channel switching mode par 0x69 must thereby have a value of 1 so that the
relevant list of the corresponding antenna port is used. The ETSI channel list of
antenna port 1 can contain up to 16 entries.
Value range: 0x00 to 0x0F
0x00 no channel
0x01 ETSI channel 1 (865.1 MHz)
0x0F ETSI channel 15 (867.9 MHz)
Default: Channels 0x04, 0x07, 0x0A, and 0x0D