User's Manual

Product Manual - RFID Reader UF70 Certum 110
Chapter 7
Operation
UGK – Determine
active parameter
set
For the typical reader parameters (parameter number 100 to max. 240), up to 8
parameter sets can be created and selected. After starting the reader, the default
parameter set will automatically become the active parameter set. Any changes
to the reader parameters only affect the active parameter set. The active
parameter set can be determined by the UGK command.
Example:
<< n0 (Powerup reset)
>> UGK0
<< ugk000
Active parameter set number 00 (default value)
Host reader
CMD Reader ID
UGK 1 byte
Reader host
CMD Reader ID Parameter set no.
ugk 1 byte 2 bytes