Installation Guide

Chapter 2
Safety Instructions
Installation Guide - RFID Reader UF70 Certum 9
2Safety Instructions
This chapter gives you an overview of the following topics:
■  Area of application and symbols
■  ESD instructions
■  Residual risks
■  Additional instructions
2.1 Area of application and symbols
The device was constructed according to state-of-the-art technology and
recognized safety regulations. In order to prevent any risks to life and limb of the
user, third parties or damage to the device, only use the device for its intended
purpose and in perfect condition with regard to safety.
Bodily injuries and/or property damage resulting from non-compliance with the
instructions given in the installation guide are the responsibility of the company
operating the device or of the assigned personnel.
Malfunctions that could compromise safety must be eliminated immediately.
2.1.1 Safety symbols – in compliance with 4844-2
Special safety symbols in accordance with DIN 4844-2 are used in the corre-
sponding passages in the text of this installation guide and require special atten-
tion depending on the combination of signal word and symbol.
DANGER
Danger to life, risk of injuries or damage to property
Risks exist when disregarding the installation guide and the safety instructions
therein.
Carefully read the installation guide before initial commissioning. Perform the
required safety measures before initial commissioning.
Follow the general safety information as well as the special safety information
given in other chapters.
WARNING
Risk of injuries when disregarding safety symbols
Risks exist when disregarding warnings in the installation guide.
Please heed the warnings.