Installation Guide
Table Of Contents
- Installation Guide RFID Reader UF70 Certum
- 1 Identification
- 2 Safety Instructions
- 3 Product Specifications
- 4 Installation
- 5 Service and Troubleshooting
- 6 Dismantling and Disposal
- Index
Chapter 4
Installation
Installation Guide - RFID Reader UF70 Certum 27
4.9.3 Parameters of the Ethernet interface
The Ethernet is connected via an Ethernet module.
Tools are available that allow the Ethernet settings to be configured.
By using Discovery Tools, all Ethernet devices located in the network can be
found.
The respective device can be configured via a web server and a web browser via a
double click. If the TCP / IP address is known, the web server can also be directly
opened in a browser also follows:
http://xxx.xxx.xxx.xxx/
User: "root"
Password: "dbps"
xxx.xxx.xxx.xxx – currently set IP address
Login
The IP address can be set via the "network" link. The settings are transferred with
the "apply" button and the device is then rebooted.