Installation Guide
Table Of Contents
- Installation Guide RFID Reader UF70 Certum
- 1 Identification
- 2 Safety Instructions
- 3 Product Specifications
- 4 Installation
- 5 Service and Troubleshooting
- 6 Dismantling and Disposal
- Index
Chapter 4
Installation
Installation Guide - RFID Reader UF70 Certum 23
4.4 Assembly of the device
Installation
dimensions
ATTENTION
The mounting surface must be stable, non-flammable, dry and clean.
If necessary, clean it before installing the device.
The device must be installed so that air can freely circulate vertically through
the heat sink, and the operating and environmental conditions specified under
Technical data are met at all times.