Installation Guide
Table Of Contents
- Installation Guide RFID Reader UF70 Certum
- 1 Identification
- 2 Safety Instructions
- 3 Product Specifications
- 4 Installation
- 5 Service and Troubleshooting
- 6 Dismantling and Disposal
- Index
Chapter 4
Installation
Installation Guide - RFID Reader UF70 Certum 21
CAUTION
Never expose the device to extreme temperature fluctuations, since otherwise
condensation develops in the device and causes damage.
Do not install the device in the vicinity of voltage lines or other power lines with
which they could collide (for example, when drilling), which could result in
serious injuries or even death.
The device (especially the antenna) should not be installed in the immediate
vicinity of electrical equipment such as medical devices, monitors, telephones,
TV sets, magnetic disks and metal objects.
This could result in reduced read and write ranges.
Never use the device in explosive areas (such as paint warehouses).
CAUTION
Do not use the device in areas where it is exposed to vibrations or shocks.
ATTENTION
The installation location must be adequately illuminated during the installation.
Never install the device during a lightning storm.
Verify that the installation meets the requirements of the (country-specific) FCC
for human exposure to radio frequencies.










