Installation Guide

Chapter 4
Installation
Installation Guide - RFID Reader UF70 Certum 20
4 Installation
This chapter gives you an overview of the following topics:
■  Safety instructions
■  Qualified installation personnel
■  Unpacking
■  Assembly of the device
■  Antenna installation
■  Power supply
■  Terminal connection
■  External input and output (optional)
■  Commissioning
4.1 Safety instructions
Follow the instructions in the safety chapter
Follow the general safety instructions in the chapter  Safety Instructions.
CAUTION
The device is designed for indoor use in an industrial setting only.
Installation is only allowed in an interior room at a constant temperature
between -20 °C / -4 °F and +50 °C / 122 °F, and a relative humidity between
25% and 85%.
Never use the device near or in water.
Never pour liquids of any type over the device. If the device should accidentally
come in contact with liquid, disconnect it and have it checked by a technician.
Do not install the device near heat sources such as radiators, heat registers,
stoves or other devices (including amplifiers) that generate heat.
Do not install the device in a flammable environment.