User's Manual

RS232-Transponder Reader
(SECS1-Protocol), Release 0.3 Draft Page 88 of 91
2000-09-29
ID: ID000093
10. The reader sends the message S3F7 after the cassette was removed from
the sensor.
Reader to Host: S3F7
19:39:17 Incoming: ENQ ( 05 )
19:39:17 Outgoing: EOT ( 04 )
19:39:17 Incoming: Length Byte ( 1D )
19:39:17 Incoming: Header ( 81 FF 83 07 80 01 00 01 00 0B )
19:39:17 Incoming: Data ( 01 03)
19:39:17 Incoming: Data ( 21 01 14 )
19:39:17 Incoming: Data ( 21 01 40 ) ->Initiator=1, Sensor 0=0, Sensor 1=0
19:39:17 Incoming: Data ( 21 09 F1 ) ->Page=241
19:39:17 Incoming: Data ( 11 11 11 ) ->ID=“17 17 17 17 17 17 17 17“ (decimal)
19:39:17 Incoming: Data ( 11 11 11 )
19:39:17 Incoming: Data ( 11 11 )
19:39:17 Incoming: Checksum ( 04 D6 )
19:39:17 Outgoing: ACK ( 06 )
Host to Reader: S3F8
19:39:17 Outgoing: ENQ ( 05 )
19:39:17 Incoming: EOT ( 04 )
19:39:17 Outgoing: Length Byte ( 0D )
19:39:17 Outgoing: Header ( 01 FF 03 08 80 01 00 01 00 0B )
19:39:17 Outgoing: Data ( 21 01 01 ) ->Sensor 1 Acknowledge
19:39:17 Outgoing: Checksum ( BB 01 )
19:39:17 Incoming: ACK ( 06 )
11. The reader detects an unrecognized device-ID and sends the message
S9F1.
Host to Reader: S1F1
08:17:16 Outgoing: ENQ ( 05 )
08:17:16 Incoming: EOT ( 04 )
08:17:16 Outgoing: Length Byte ( 0A )
08:17:16 Outgoing: Header ( 01 D2 81 01 80 01 00 00 00 03 )
08:17:16 Outgoing: Checksum ( D9 02 )
08:17:16 Incoming: ACK ( 06 )