User's Manual

RS232-Transponder Reader
(SECS1-Protocol), Release 0.3 Draft Page 55 of 91
2000-09-29
ID: ID000093
MF Format: B[1]
Material format code.
20: The material port number corresponds to the sensor number and state
Where used: S3F5, S3F7
MHEAD Format: B[10]
SECS Message Block Header associated with message block in error.
Where used: S9F1, S9F3, S9F5, S9F7, S9F9
MID Format: A[max16]
Description: Material ID.
The MID corresponds to the first page (16 characters from
‘0’…’F’) of the TIRIS transponder. Depend on the transponder-
type, it is possible to modify the MID.
Multipage-transponder: MID is stored in page 1 (writeable)
Read/Write-Transponder: MID correspond to DATA (writeable)
Read/Only-Transponder : MID correspond to DATA (fix)
Where used: S18F10, S18F11