User's Manual

RS232-Transponder Reader
(SECS1-Protocol), Release 0.3 Draft Page 51 of 91
2000-09-29
ID: ID000093
EAC Format: B[1]
Acknowledge code for new reader constant
0: parameter set successfully
1: parameter could not be set
Where used: S2F16
ECID Format U1[1]
Parameter number of reader (look data item ECV)
Where used: S2F13, S2F15
ECV
Format U1[1]
Reader parameters definition. The values here are shown as decimal-values!
Parameters:
Parameter 0: Gateway-ID
The gateway-ID is a part of the device-ID. The HERMOS SECS-1 reader works
simultaneously as gateway and reader.
In the header of a message it is the “lower message ID”.
00 .. 255
default: last two characters of serial number.