User's Manual

ScanID
Release 1.0 Page
6 of 21
2002-08-05
ID: ID020058
3.1 Membrane Keyboard
On/Off:
This key switches on and off the reader. Push the key for more than 3 seconds to
switch off.
Read:
The ‘Read’ button is used to start the reading of the RF-tag data. In case of an
unsuccessful reading, the handheld tries to read the RF tag up to 5 times (default
setting).
In menu mode this key applies the entered code to enter the HERMOS menu.
Select:
Normally this key is used to rotate between the different views of the tag
information. Also it selects the marked menu items in the menu mode.
In triggered mode the select button establishes a channel to the base station to
transmit the data.
ESC:
The ESC key steps out of the current menu up to the start screen.
Shift up and down:
These buttons are used to scroll in the different menus.
Display:
Graphic display with a resolution of 128x64 dots.
The display can show 8 lines with 21 signs per line.
The big font needs two lines per sign.
The display memory can hold 32 lines with 21 signs which can be scrolled.