User's Manual

ScanID
Release 1.0 Page
15 of 21
2002-08-05
ID: ID020058
4.2.7 HERMOS Setup
Select the wanted parameter with the cursor buttons. To change the value of the
parameter, use the ‚Select’ button.
Readmode: 1 = read mode changeable, 0 = read mode fix
Typemode: 1 = ScanID type adjustable, 0 = ScanID type fix (dummy)
Pagemode: 1 = type/page adjustable, 0 = typ/page fix
Codemode: 1 = display mode adjustable, 0 = display mode fix
Testmode: 0 .. 2; 0 = Off, 1 = test msg. 0x81,
2 = test msg 0x81 with sync.-reset
Language: 0 = German, 1 = English
MaxRepeat: 1 .. 9, number of repeated readings , default = 5
Baudrate: baud rate of the module (dummy)
TimeOut5 : 1 .. 9, message timeout after X x 5s, default = 2 Æ 10s
! The red colored modes are not available for this type !
HERMOS Setup
Readmode: 1
Typemode: 1
Pagemode: 1
Codemode: 1
Testmode: 0
Language: 0
MaxRepeat: 5
Baudrate: 3
TimeOut5: 2